bree posted an update 1 year, 11 months ago
Being a tiki bar owner let’s focus on over 5 years We have learned issues that I wish could have done and issues that I’d never do again. I must reveal to you my mistakes and enhancements to my tiki bar.
First I must discuss some things which i learned building my very own outside bar. Outside, need I say more! The elements conditions in your town will determine the method that you make your bar. Allow me to share ideas you need to look closely at in case you are building another tiki bar.
Your Climate- If you live in a region containing warm summers and cold winters, you will encounter exactly the same obstacles which i came against. Ensure you use treated wood for just about any surface which will come talking to the ground. Unless you follow this rule then your tiki bar has decided to shrink and crack. This is why you need to use treated lumber; it shrinks less and can last considerably longer. When you have wood that is exposed to the elements you need to pay close attention to the wood you use and proper treating from the wood after it can be installed.
Insects- I used white cedar logs for that construction of my roof structure because cedar is supposed to be less prone to insect damage. Okay, throw that out the window, I went along for several years with no insect problems until a year ago. I noticed wood dust and small chips lying on my small bar top. It’s about time received from thatch falling or breaking apart but as it turned out I needed carpenter bees! After inspecting my white cedar logs I stumbled upon holes about 3/8 inch bored in certain of my logs. I knew I needed to address this situation immediately after doing a bit of research I called an exterminator. A carpenter bee looks almost identical to a common bumble bee except no hair on abdomen as well as the these are struggling to sting. They love natural cedar! May sure you are applying either wood preservative or even a good Valspar varnish on your logs.
Bar Top- There are several opinions in what to use for your bar top. I did so skimp here and sorry I did so! It is strongly recommended the application of marine plywood for that bar top, and even for good reason. I used the subsequent most sensible thing I thought, oak plywood. The oak plywood was for the initial year or two, applying about ten coats of marine varnish. This may be fine except the edges from the plywood are incredibly hard to seal. Once water started getting yourself into wood I needed just problems! To unravel my problem I applied glass tile to my tiki bar top using waterproof glue and grout. The marine plywood is quite expensive but definitely worth the money.
Palm Thatch- Living of the roof for the tiki bar is sure to be based upon your weather. You’ll be able to you’ll need replacing your thatch palms no less than every a couple of years. In order to that you could eliminate this issue is to purchase good quality commercial synthetic thatch. The recognition of outside restaurants with tiki thatch roofs has developed an excuse for this synthetic thatch. I recently re-thatched my bar with sealed thatch that can offer you an additional 2 years of additional life.
Securing Your Bar- Another thing I must mention here, is anchoring your bar down is a must item. I am fortunate that my bar is located on a concrete apron throughout my swimming pool area. I used stop by concrete anchors to avoid my bar from blowing over in high winds.
To learn more about tiki mugs browse the best internet page: click to read more